Dongguan Ampfort Electronics Co., Ltd.
Smart Circuit Protection Experts Around You
Add to Cart
Bussmann Keystone 01020074z SFE Class J K Glass Fuse Clip Clamps FS-008 For 2AG Tube Fuse
The role of the fuse clip?
The fuse clip can protect the fuses that are not easy to damage and oxidize during transportation. They are usually used on the line board of the product, and the fuse with its fuse is more convenient to replace it. The following factors should be considered when choosing:
1. The size of the fuse
2. current
3. The size of the lineboard design and installation position
Features
1. Bronze electricity is good, the resistance is small
2. Easy to process
3. Electroplating is convenient
4. Low cost
Size
Test
The fuse is generally judged by eye observation, because the shell of the fuse is transparent glass
| (1) | The fuse is not dark. At this time, you can clearly see that the two shiny offspring after the fuse melted. This shows that the current current is not large. It is likely that it is not a circuit failure. It may be due to the poor quality of the fuse. , Or occasionally the wave current, at this time, can be replaced with a trial. |
| (2) | The fuse is dark, but the degree of darkness is not very serious. The fuse tube glass is not broken, indicating that over the current situation is larger than the previous situation, but it is not the biggest situation, which shows that there is a current failure in the circuit. |
| (3) | The fuse tube is severely black, burnt or glass tube is broken, indicating that over -current is large, short -circuit failures are serious, and the circuit failure must be excluded before replacing the fuse. |
Fuse Clip Types