Dongguan Ampfort Electronics Co., Ltd.
Smart Circuit Protection Experts Around You
Add to Cart
11mm Ultra-Thin Film NTC Thermistor 5K 10K 50K 100K For Fast Response Air Temperature Sensors
Description Of The 11mm Ultra-Thin Film NTC Thermistor
MF55 temperature measurement type thin film NTC thermistor is a small volume thin film NTC thermistor produced with new materials and new technology, which has the advantages of high precision and fast response.
Typical Application Of The 11mm Ultra-Thin Film NTC Thermistor
* Air conditioning equipment
* Heating equipment
* Electronic thermometer
* Liquid level sensor
* Automobile electronics
* Electronic desk calendar
* Mobile phone battery
* Battery packs, chargers
* E-Vehicles
* IOT devices
* Medical devices
* Fire & security devices
* Surface temperature sensors
* Fast response air temperature sensors
Main Features Of The 11mm Ultra-Thin Film NTC Thermistor
* High test accuracy
* Stable work for a long time
* Good interchangeability and consistency
* Small size,one of thinnest available worldwide -less than 0.9mm thick.
* Laminated within 2 polymer layers – flexible yet resilient.
* Operating range -50°C/+125°C
* Very fast response times.
* Standard R25 values are 5kohms,10kohms,50kohms and 100kohms with lengths of 11mm.15mm,20mm,25mm, 36mm,44mm.45mm,50mm, and 75mm .
Standard Specification Of The 11mm Ultra-Thin Film NTC Thermistor
| Part Number | Norminal Resistance | B Value(K) | Operating temperature | |||
| R25 (KΩ) | Tolerance | (25/50℃) | (25/85℃) | Tolerance | (℃) | |
| MF55□502□3270A | 5 | ±1％ ±2％ ±3％ ±5％ | 3270 | ±1％ ±2％ ±3％ ±5％ | -50～125 | |
| MF55□502□3470A | 5 | 3470 | ||||
| MF55□103□3380A | 10 | 3380 | ||||
| MF55□103□3435B | 10 | 3435 | ||||
| MF55□103□3470B | 10 | 3470 | ||||
| MF55□103□3950A | 10 | 3950 | ||||
| MF55□103□3975B | 10 | 3975 | ||||
| MF55□203□3950A | 20 | 3950 | ||||
| MF55□303□3950A | 30 | 3950 | ||||
| MF55□473□3950A | 47 | 3950 | ||||
| MF55□503□3950A | 50 | 3950 | ||||
| MF55□104□3950A | 100 | 3950 | ||||
Notes:
1). Do not bend the resistance wire frame at will to avoid the chip and wire frame falling off and causing poor resistance;
2). The temperature should not exceed 300℃ during welding, and the welding time should not exceed 0.5 seconds;
3). Use a hot air gun when shrinking the sleeve, and the temperature of the air gun should be controlled at about 120℃;
4). Use a constant-temperature soldering iron when soldering, with a flat soldering iron tip, holding the resistor in one hand and the wire in the other for butt welding, which can improve production efficiency and shorten welding time;
5). Special Note: Do not touch the chip (ie the top of the resistor) with your hands!
6). Custom made is available
Dimension Of The 11mm Ultra-Thin Film NTC Thermistor (mm)
| Total Length= 11mm
|
| Total length=15mm
|
| Total length=20mm
|
| Total length=20mm(Width=3.6mm)
|
| Total length=20mm(Width=4.5mm)
|
| Total length=36mm
|
| Total length=44mm
|
| Total length=45mm
|
| Total length=50mm
|
| Total length=75mm
|
ROHS & REACH Certification
Related Products Of The 11mm Ultra-Thin Film NTC Thermistor